High performance H2 sensor based on rGO-wrapped SnO2–Pd porous hollow spheres

Hydrogen (H₂) sensors based on metal oxide semiconductors (MOS) are promising for many applications such as a rocket propellant, industrial gas and the safety of storage. However, poor selectivity at low analyte concentrations, and independent response on high humidity limit the practical applications. Herein, we designed rGO-wrapped SnO₂–Pd porous hollow spheres composite (SnO₂–Pd@rGO) for high performance H₂ sensor. The porous hollow structure was from the carbon sphere template. The rGO wrapping was via self-assembly of GO on SnO₂-based spheres with subsequent thermal reduction in H₂ ambient. This sensor exhibited excellently selective H₂ sensing performances at 390 °C, linear response over a broad concentration range (0.1–1000 ppm) with recovery time of only 3 s, a high response of ～8 to 0.1 ppm H₂ in a minute, and acceptable stability under high humidity conditions (e. g. 80%). The calculated detection limit of 16.5 ppb opened up the possibility of trace H₂ monitoring. Furthermore, this sensor demonstrated certain response to H₂ at the minimum concentration of 50 ppm at 130 °C. These performances mainly benefited from the special hollow porous structure with abundant heterojunctions, the catalysis of the doped-PdO_x, the relative hydrophobic surface from rGO, and the deoxygenation after H₂ reduction.     

Measuring the disparity among scientific disciplines using Library of Congress Subject Headings

Scientometrics - Examining the relationships among scientific disciplines is important today, but existing methods are limited by the contents and structure of their bibliographic databases. We...     

A novel Z-type multidimensional FeSe2/CuSe heterojunction photocatalyst with high photocatalytic and photoelectrochemical performance

A novel Z-type multidimensional FeSe₂/CuSe heterojunction photocatalyst was synthesized by a hydrothermal progress. In the reaction, 1D FeSe₂ nanorods will load on the surface of 2D CuSe nanosheets to construct heterojunction. This Z-type heterojunction can improve the carriers separated efficiency and reduce internal resistance (as low as 0.31 kΩ). More importantly, the catalysts display both high oxidation and reduction ability confirmed by photocatalytic and photoelectrochemical test. Under the optimum concentration, the catalyst showed 7.4 times of degradation tetracycline hydrochloride rate, and 4 times of photocurrent density than pure CuSe. Active specie O₂^?? was detected by the electron spin resonance tool during photocatalytic degradation progress which could confirm that a Z-type heterojunction was constructed between CuSe and FeSe₂. In this Z-type heterojunction, photoinduced electrons in the conduction band of FeSe₂ can directly inject the valence band of CuSe while photoinduced electrons in the conduction band position of CuSe and photoinduced holes in the valence band position of FeSe₂ will remain. The remained photoinduced electrons in the conduction band of CuSe can generate O₂^?? to oxide tetracycline hydrochloride as well as photoinduced electrons to produce hydrogen. This work highlights a simple strategy of Z-tpye selenides heterostructure for oxidation and reduction application.     

High Q×f values of Zn-Ni co-modified LiMg0.9Zn0.1-xNixPO4 microwave dielectric ceramics for 5G/6G LTCC modules

In this work, Zn-Ni co-modified LiMg_0.9Zn_0.1-xNi_xPO₄ (x = 0–0.1) microwave dielectric ceramics were fabricated using a solid state synthesis route. Rietveld refinement of the XRD data revealed that all ceramic samples have formed a single phase with olivine structure. SEM images showed that the samples have a dense microstructure, that agrees with the measured relative density of 97.73 %. Based on the complex chemical bond theory, Raman and infrared reflectance spectra, we postulate that ε_r is mainly affected by the ionic polarizability, lattice and bond energy, while P-O bond plays a decisive role in Q×f and τ_f value. Optimum properties of Q×f ~ 153,500 GHz, ε_r ~ 7.13 and τ_f ~ ?59 ppm/°C were achieved for the composition LiMg_0.9Zn_0.06Ni_0.04PO₄ sintered at 875 ℃ for 2 h. This set of properties makes these ceramics an excellent candidate for LTCC, wave-guide filters and antennas for 5 G/6 G communication applications.     

IRS辅助的SWIPT系统中基于能效优先的波束成形设计与优化

以智能反射面(intelligent reflecting surface,IRS)辅助的无线携能通信(simultaneous wireless information and power transfer,SWIPT)系统为背景,研究了该系统中基于能效优先的多天线发送端有源波束成形与IRS无源波束成形联合设计与优化方法。以最大化接收端的最小能效为优化目标,构造在发送端功率、接收端能量阈值、IRS相移等多约束下的非线性优化问题,用交替方向乘子法(alternating direction method of multipliers,ADMM)求解。采用Dinkelbach算法转化目标函数,通过奇异值分解(singular value decomposition,SVD)和半定松弛(semi-definite relaxation,SDR)得到发送端有源波束成形向量。采用SDR得到IRS相移矩阵与反射波束成形向量。结果表明,该系统显著降低了系统能量收集(energy harvesting,EH)接收端的能量阈值。当系统总电路功耗为?15 dBm时,所提方案的用户能效为300 KB/J。当IRS反射阵源数与发送天线数均为最大值时,系统可达最大能效。     

Polymer electrets and their applications

Polymer electrets have revealed great potential application in electromechanical devices because of the low weight, large quasi-piezoelectric sensitivity, and excellent flexibility. For an electret, a permanent and macroscopic electric field exists on the surface, principally led by a macroscopic electrostatic charge on the surface or a net orientation of polar groups inside the object. Here, progress in the development of polymer electrets is reviewed. After a brief retrospect of the research courses and those typical polymer electrets that are classified into fluorine polymer and nonfluorine polymer, we present a survey on the charging methods, including corona, soft X-ray, contact, thermal and monoenergetic particle beams. The latest representative applications (i.e., power harvesting, sensors, field effect transistors, and biomedicine) based on polymer electrets are also summarized. Finally, we complete this review with a discussion on perspectives and challenges in this field.     

Eye movements and visual discomfort when viewing stereoscopic 3D content

The visual brain fuses the left and right images projected onto the two eyes from a stereoscopic 3D (S3D) display, perceives parallax, and rebuilds a sense of depth. In this process, the eyes adjust vergence and accommodation to adapt to the depths and parallax of the points they gazed at. Conflicts between accommodation and vergence when viewing S3D content potentially lead to visual discomfort. A variety of approaches have been taken towards understanding the perceptual bases of discomfort felt when viewing S3D, including extreme disparities or disparity gradients, negative disparities, dichoptic presentations, and so on. However less effort has been applied towards understanding the role of eye movements as they relate to visual discomfort when viewing S3D. To study eye movements in the context of S3D viewing discomfort, a Shifted-S3D-Image-Database (SSID) is constructed using 11 original nature scene S3D images and their 6 shifted versions. We conducted eye-tracking experiments on humans viewing S3D images in SSID while simultaneously collecting their judgments of experienced visual discomfort. From the collected eye-tracking data, regions of interest (ROIs) were extracted by kernel density estimation using the fixation data, and an empirical formula fitted between the disparities of salient objects marked by the ROIs and the mean opinion scores (MOS). Finally, eye-tracking data was used to analyze the eye movement characteristics related to S3D image quality. Fifteen eye movement features were extracted, and a visual discomfort predication model learned using a support vector regressor (SVR). By analyzing the correlations between features and MOS, we conclude that angular disparity features have a strong correlation with human judgments of discomfort.     

Ultrathin MoSe2 three-dimensional nanospheres as high carriers transmission channel and full spectrum harvester toward excellent photocatalytic and photoelectrochemical performance

MoSe₂ ultrathin nanospheres with three-dimensional network structure (MSS) were prepared by improved solvothermal method. These MoSe₂ nanospheres are only 10 nm in size and actually composed of ultra-thin MoSe₂ nanosheets with a thickness of only 2–3 molecular layers. Compared with the MoSe₂ nanosheets (6–8 molecular layer thicknesses) of the three-dimensional flower structure (MSF) prepared by ordinary hydrothermal method, the MSS are thinner resulting in higher specific surface area of 5 times than that of MSF, and the light absorption ability at all UV–vis spectrum is stronger. The photocatalytic and photoelectrochemistry results show that the photocatalytic activity of MSS is 17 times that of the MSF, and the photoelectrochemical performance is twice. The results of electrochemical impedance spectroscopy and fluorescence spectroscopy confirmed that the MoSe₂ ultra-thin nanospheres with three-dimensional network structure have lower internal resistance and higher carrier transport and separation efficiency. In the most important three aspects that determine the photoelectrochemical performance of photocatalyst: specific surface area, light absorption capacity, carrier transport and separation efficiency, MSS exceed MSF. This three-dimensional network nanospheres structure can improve the performance of MoSe₂. This research successfully demonstrates the enhancement of the properties of MoSe₂ two-dimensional materials through structural regulation.     

太阳能及空气源热泵复合供热系统故障诊断研究与应用

为确保复杂太阳能热水系统的稳定运行,有必要采集实时运行数据从中获取故障特征信号,通过专家系统进行自动故障诊断。采用故障树分析方法,以太阳能热利用系统典型故障为例构建故障树,求解最小割集,并以此为基础建立诊断知识库;运用正向推理结合人工辅助决策机制进行故障诊断和定位,建立故障诊断专家系统。开发故障诊断软件,并在工程中进行测试,验证故障辨识的准确性。